Friday, 26 April 2013

RAID Creation in HP server

RAID Creation in HP server

           Here below i have mentioned step by step for RAID creation in HP servers

1.Restart the server.
2.Press F8 to enter Disk utility
3.There you can found option to delete disk files & then you can create option
4. Select RAID 1 option
5. Select both Hard disk  to create RAID 1 in HP server
6.Click enter to create RAID 1 option then select change option
7.Finally click DONE to finish creating RAID  in HP Server..

Then your HP server Ready to boot with RAID control,

         Restart your server  then  boot with your OS , If you have any problem means to detect your hard disk means download below driver from below link

Click Here



            Once you got download this driver make this driver into one pen dive then you can install this driver during OS installation time , then your hard disk will enable

                Then you are free to install your OS in HP Server.....

Tuesday, 23 April 2013

How to delete temp files in windows 7, XP

Hi,
     If you need remove all temp files in your system, Please follow this steps.


Go to start > Run> Type %temp% then click OK  > now open it temp files in current profile > Delete all temp file in the Temporary file folder.

Go to My computer > Select C Drive> Right click the C drive > Go to Properties> Select disk cleanup >
 Check the all box > Then click OK   Now Clear the all temp files in C drive at current profiles.


If you need any help please write to helpdesk.techexpert@gmail.com

How to speed up the Internet Explorer


Hi,

    If your browser working slow or web page open very slow means please do following description.

  • Delete the browsing history.
            Internet Explorer :

          Go to Tools> Internet Option  > General > Browsing History > Click  Delete Button > select all catagory > Then click delete.
           
          Go to Tools>  Internet Option  > Content > Auto complete> click settings > Check all box > Then            click delete.

          Go to Tools >Internet Option  > Security > Click Reset All Zones To default Level 
           
          Go to Tools>  Internet Option   > Tools >Toolbars > Manage add-ons > Tools & Extension > Disable all addons.



If you need any help please write to helpdesk.techexpert@gmail.com

Thursday, 18 April 2013

PC DISPLAY PROBLEM




If you have  PC display problem please check the following Hardware components.

1. Check monitor power cable and power switch.

2. Check the VGA cabel and reconnect properly.

3. Check the RAM slot and remove the RAM and clean dust at RAM and RAM slots.

4. Check SMPS 4 pin out panel power connecter and SMPS 40 pin connector working     status.

5. Check  Processor and clean the dust and reinsert processor properly.



If you need any help please write to helpdesk.techexpert@gmail.com

PC BOOTING PROBLEM




If you have PC booting problem please check following  Hardware components:

1.Check first boot option (1st boot at HDD other wise change the boot option at BIOS)

2.Check HDD power and SATA/IDE cables and reconnect properly.


All hardware component installed correcly then check following steps:

1. Restsrt your system then press F8 function key  now go to windows advanced option,
    Now go to lastknown good configuration option then give enter now go to OS normally.

2. Restsrt your system then press F8 function key,  Now go to windows advanced option,
    Now go to safe mode/safe mode with Networking  option the give enter ,
    Now go to  windows safe mode/safe mode with Networking .
 
     Then go to run>type cmd> type chkdsk  then give enter now check the system drive if have HDD error                                  
     then disk check was automatically stooped.

   Now type chkdsk \f  comment then give enter next line asking do you want continue the disk stat up disk
   checking give yes the exit the comment prompt. Then restart the system. After restart the system HDD
   disk checking going ON then completed the disk checking Now OS booting problem was cleared.

3. Boot your OS CD/DVD then go to repair option and enter your admin password then type chkdsk \r
    give enter now recovere the currupted and missing OS files.



If you need any help please write to helpdesk.techexpert@gmail.com








How to Enable Administrator account in Windows 7




Cmd to Enable Administrator Account in Windows 7


         Here below i have a cmd to Enable Administrator Account from another account

1.Start --> Run
2.Type CMD click OK
3.And then Type net user Administrator / activete:yes for Activate Account
4.net user Administrator / activete:no for Disable Account.





If you need any help please write to helpdesk.techexpert@gmail.com






PRINTER SPOOLER PROBLEM

Technical issue for Solve Printer Spooler problem

      If you using more than one system in network to take print , on that time we are getting printer spooler error, then we are unable to take print in that priner , also we are unable to reinatall the printer driver & we are unable to delete the pending documents also......

     In that situation  i have a option to restore that printer back to working condition

Here below i have given solution to resolve the issue

Please run the given spooler exe

Spooler.exe Download Here

Then run the exe file and clear your printer spooler problem.




If you need any help please write to helpdesk.techexpert@gmail.com